Adjust The Headlight Range; Changing The Combination Instrument Battery - Husqvarna FE 350 2022 Owner's Manual

15.11

Adjust the headlight range.

15.12

Changing the combination instrument battery

Preparatory work
–
Check the headlight setting. (
Main work
–
Loosen screw
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on
the lower mark for a motorcycle with rider (instructions on
how to apply the mark: Checking the headlight setting).
Info
H03755-10
A change in weight on the vehicle may require a cor-
rection of the headlight range.
–
Tighten screw
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Pull the combination instrument upward out of the holder.
H03756-10
–
Using a coin, turn protection cap
clockwise and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument battery with the label fac-
ing outward.
Combination instrument battery (CR 2032) (
–
Check the O-ring of the protection cap for correct seating.
H03757-10
–
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
H03758-10
ELECTRICAL SYSTEM 15
p. 116)
1
.
1
.
1
with the washers.
2
all the way counter-
3
2
and turn all the way clockwise
p. 113)
.
p. 147)
117