Checking The Static Sag Of The Shock Absorber; Checking The Riding Sag Of The Shock Absorber - Husqvarna FE 350 2022 Owner's Manual

11 TUNING THE CHASSIS
11.7
11.8
48

Checking the static sag of the shock absorber

402416-10

Checking the riding sag of the shock absorber

402417-10
Finishing work
–
Remove the motorcycle from the lift stand. (
–
A
Measure dimension of rear wheel unloaded. (
–
Hold the motorcycle upright with aid of an assistant.
–
Measure the distance again between the rear axle and mark-
ing SAG on the rear fender using the sag gage.
–
Note the value as dimension
Info
The static sag is the difference between measure-
A B
ments and
–
Check the static sag.
Static sag
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
( p. 49)
–
A
Measure dimension of rear wheel unloaded. (
–
With another person holding the motorcycle, the rider, wear-
ing full protective clothing, sits on the seat in a normal sitting
position (feet on footrests) and bounces up and down a few
times.
The rear wheel suspension levels out.
–
Another person again measures the distance between the
rear axle and marking SAG on the rear fender using the sag
gage.
–
Note the value as dimension
Info
The riding sag is the difference between measure-
A C
ments and
–
Check riding sag.
Guideline
Riding sag
» If the riding sag differs from the specified measurement:
–
Adjust the riding sag.
p. 54)
p. 47)
B
.
.
37 mm (1.46 in)
p. 47)
C
.
.
110 mm (4.33 in)
( p. 50)