Adjusting The Riding Sag; Checking The Basic Setting Of The Fork - Husqvarna FE 350 2022 Owner's Manual

11 TUNING THE CHASSIS
11.10
11.11
50

Adjusting the riding sag

B00292-10

Checking the basic setting of the fork

Info
For various reasons, no exact riding sag can be determined for the fork.
401000-01
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate
Weight of rider: 65 ...
75 kg (143 ... 165 lb.)
Weight of rider: 75 ...
85 kg (165 ... 187 lb.)
Weight of rider: 85 ...
95 kg (187 ... 209 lb.)
Info
The spring rate is shown on the outside of the spring.
Smaller weight differences can be compensated by
changing the spring preload.
Finishing work
–
Install the shock absorber.
–
Remove the motorcycle from the lift stand. (
–
Check the static sag of the shock absorber. (
–
Check the riding sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
–
As with the shock absorber, smaller differences in the rider's
weight can be compensated by the spring preload.
–
However, if the fork frequently bottoms out (hard end stop on
compression), harder springs must be fitted to avoid damage
to the fork and frame.
–
If the fork feels unusually hard after extended periods of
operation, the fork legs need to be bled.
p. 54)
( p. 63)
39 N/mm (223 lb/in)
42 N/mm (240 lb/in)
45 N/mm (257 lb/in)
( p. 65)
p. 54)
p. 48)
p. 48)
p. 47)