12 SERVICE WORK ON THE CHASSIS
12.18
66
F03472-10
F02308-10
F03464-11
Removing the seat
–
Position the foot brake cylinder.
3
Push rod
engages in the foot brake cylinder.
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
–
Mount and tighten screw
Guideline
Screw, bottom
M10
shock absorber
Info
Raise the link fork slightly to be able to mount the
screw more easily.
–
Attach frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame pro-
tector
–
Mount the new cable ties.
Finishing work
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Remove the air filter box cover. (
4
.
M6
10 Nm (7.4 lbf ft)
5
.
M14x1.5
60 Nm (44.3 lbf ft)
B
.
6
.
60 Nm (44.3 lbf ft)
Loctite
®
C
and position.
7
with the washers.
M5
3 Nm (2.2 lbf ft)
p. 54)
p. 68)
2701™