Husqvarna FE 350 2022 Owner's Manual page 133

Info
Drain the engine oil with the engine at operating temperature.
V01393-10
V01394-10
V01395-10
V01396-10
SERVICE WORK ON THE ENGINE 18
Preparatory work
–
Park the motorcycle on a level surface.
–
Remove the engine guard. (
Main work
–
Position an appropriate container under the engine.
–
1
Remove oil drain plug
Info
Do not remove screws
–
3
Remove screw plug with oil screen
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
–
4
Position oil screen with the O-rings on a pin wrench.
–
Position the pin wrench through the drill hole of the screw
plug in the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
–
Mount and tighten screw plug
Guideline
Screw plug, oil
screen
–
Mount and tighten oil drain plug
new seal ring.
Guideline
Oil drain plug with
magnet
p. 88)
with the magnet and seal ring.
2
.
4
and the O-rings.
3
with the O-ring.
M20x1.5 15 Nm (11.1 lbf ft)
1
with the magnet and a
M12x1.5 20 Nm (14.8 lbf ft)
131