Adjusting The Characteristic Map Of The Throttle Response - Husqvarna FE 350 2022 Owner's Manual

17 TUNING THE ENGINE
17.3
124
F03510-10

Adjusting the characteristic map of the throttle response

Info
On the throttle grip, the characteristic map of the throttle response is changed by changing the guide
plate.
A guide plate with a different characteristic map is supplied.
F03511-10
Main work
–
Move the handlebar to the straight-ahead position.
–
1
Push back sleeve .
–
2
Loosen nut .
–
3
Turn adjusting screw
–
4
Loosen nut .
–
6
Push cold start button
–
5
Turn adjusting screw
to the basic position when the throttle grip is turned to the
front.
–
4
Tighten nut .
–
3
Turn adjusting screw
cable at the throttle grip.
Guideline
Play in throttle cable
–
2
Tighten nut .
–
1
Slide on sleeve .
–
Check the throttle grip for smooth operation.
Finishing work
–
Check the play in the throttle cable. (
Main work
–
1
Push back sleeve .
–
2
Remove screws and half-shells
–
Detach the throttle cables and take off the grip tube.
in as far as possible.
all the way to the stop.
so that the cold start button moves
so that there is play in the throttle
3 ... 5 mm (0.12 ... 0.2 in)
p. 123)
3
.