15 ELECTRICAL SYSTEM
15.11
15.12
116
Adjust the headlight range.
H03755-10
Changing the combination instrument battery
H03756-10
H03757-10
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
1
Loosen screw
.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on
the lower mark for a motorcycle with rider (instructions on
how to apply the mark: Checking the headlight setting).
Info
A change in weight on the vehicle may require a cor-
rection of the headlight range.
–
1
Tighten screw
.
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws
with the washers.
–
Pull the combination instrument upward out of the holder.
–
Using a coin, turn protection cap
clockwise and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument battery with the label fac-
ing outward.
Combination instrument battery (CR 2032) (
–
Check the O-ring of the protection cap for correct seating.
p. 116)
p. 115)
p. 112)
2
all the way counter-
3
.
p. 144)