Idle Speed Adjusting Screw; Shift Lever - Husqvarna FE 350 2022 Owner's Manual

6.17

Idle speed adjusting screw

6.18

Shift lever

The idle setting of the throttle valve body substantially influences
the vehicle's starting behavior, a stable idle speed, and the vehi-
cle's response when the throttle is opened.
An engine with a correctly set idle speed is easier to start than an
engine with the idle speed set incorrectly.
The idle speed is adjusted using the idle speed adjusting
1
screw .
Increase the idle speed by turning the idle speed adjusting screw
clockwise.
Decrease the idle speed by turning the idle speed adjusting
screw counterclockwise.
S03549-10
1
Shift lever is mounted on the left of the engine.
401950-10
The gear positions can be seen in the figure.
The neutral or idle position is between the first and second gears.
401950-11
CONTROLS 6
23