Lubricating The Steering Head Bearing; Removing Front Fender - Husqvarna FE 350 2022 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.13
12.14
62

Lubricating the steering head bearing

H02387-01

Removing front fender

H03690-10
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated
in the course of removal and installation of the lower
triple clamp.
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws .
–
2
Remove screws . Take off the front fender.
( p. 57)
( p. 58)
p. 113)