Changing The Mapping; Adjusting The Idle Speed - Husqvarna FE 350 2022 Owner's Manual

17 TUNING THE ENGINE
17.4
17.5
126

Changing the mapping

Warning
Voiding of the government approval for road use and the insurance coverage If the combination
switch is mounted, the vehicle's road permit, if any, expires.
–
Only operate the vehicle in closed-off areas remote from public road traffic if the combination
switch is installed.
Info
The desired engine characteristic can be activated via the MAP button on the combination switch.
The setting most recently selected is activated again when restarting.
The traction control can also be activated in each mapping using the TC button.
The mapping can also be changed during the ride.
H02889-01
H02886-01

Adjusting the idle speed

Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
Activating STANDARD mapping:
–
Press button MAP until LED 1 lights up.
Guideline
Engine speed
STANDARD – balanced response
Activating ADVANCED mapping:
–
Press button MAP until LED 2 lights up.
Guideline
Engine speed
ADVANCED – direct response
< 4,000 rpm
< 4,000 rpm