Linking Switcher Bus And Router Destination - Sony MVS-6000 User Manual

Linking Switcher Bus and Router Destination

To provide links between the switcher bus and router destination, make the
following settings as required.
Matrix selection: Select the target of link setting from the eight matrices (1 to
Matrix position definition: Set the start address and level for the source and
Link table setting: Link a switcher cross-point button and matrix source.
Link bus setting: Link a switcher bus address and router destination.
Selecting a matrix number
1
2
3
4
To delete a link
With the link selected, press [Clear].
Defining the position of a matrix
Specify where in the 1024 × 1024 S-Bus space the link matrix is to be provided,
by setting the source and destination start address.
For the matrix selected in the External Bus Link menu, use the following
procedure.
58
Overall Control Panel Settings (Config Menu)
8).
destination on the S-Bus.
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
In the <Link> group, press [External Bus Link].
The External Bus Link menu appears.
The status area shows the current link status.
Turn the knobs to select the matrix.
Knob Parameter Adjustment
1 Link No Link number
2 Link Matrix Matrix number
In the status area, the color of the selected part changes.
Press [Link Matrix Set].
This confirms the matrix selection and the selected part in the status area
returns to the previous color.
Setting values
1 to 64
1 to 8