Clearing A Source Address Setting - Sony MVS-6000 User Manual

4
5

Clearing a Source Address Setting

To clear a source address setting for a particular bit
In the Router/Tally >Serial Tally >Source Assign menu, select the serial tally
port and bit number (see steps 2 and 3 in the previous item), then press [Clear].
This clears the source address setting for the selected bit.
To clear all source address settings
In the Router/Tally >Serial Tally >Source Assign menu, select the serial tally
port, then press [All Clear].
A confirmation message appears.
• If you select "Yes," this clears all source address settings for the selected
• If you select "No," the clear operation is canceled.
220
Serial Tally Settings (Serial Tally Menu)
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Bit No
Turn the knob to select the source address.
Knob Parameter
2 Source Addr
Press [Source Address Set].
This confirms the setting.
serial tally port.
Adjustment
Bit selection
Adjustment
Source address selection
Setting values
1 to 128
Setting values
1 to 1024