Releasing the Assignment of a GPI Input Port
1
2
3
4
182
Settings Relating to Parallel Inputs (Input Config Menu)
This assigns the GPI input, and this is reflected in the status area.
In the DCU >Input Config menu, select what the setting applies to (DCU1
or DCU2) from the <DCU Select> group.
In the <Parallel Input Assign> group, if [GPI Input] is on, press it to turn
it off.
Turn the knobs to adjust the following parameters.
Knob
Parameter
1
From No
2
To No
In the <Parallel Input Assign> group, press [No Assign].
Adjustment
First port number
Last port number
Setting values
1 to To No
From No to 102