Sony MVS-6000 User Manual page 127

1
In the Switcher >Config menu, press [M/E Output Assign].
The M/E Output Assign menu appears.
2
On the list in the status area, select the bank output to be assigned.
The selected output appears in reverse video.
3
In the <M/E Output Assign> group, select the output signal to be assigned.
Setting the output configuration for each bank
When you selected [Multi Program] as the operation mode, use the following
procedure.
1
In the Switcher >Config menu, press [PGM Config].
The PGM Config menu appears.
The status area shows the background and key configuration assigned to
the output of each bank.
2
Using either of the following methods, select the output for which you
want to make the setting.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
The selected output appears in reverse video.
3
In the <Bkgd> group, select the background.
4
Select [Clean] or [Utility].
5
In each of the <Key1> to <Key4> groups, select [Enable] or [Disable].
Setting the key preview configuration
You can make this setting at any time, regardless of the operation mode.
1
In the Switcher >Config menu, press [K-PVW Config].
The K-PVW Config menu appears.
The status area shows the key preview configuration for each bank.
Parameter Adjustment
No (PGM) Output to which setting applies
Settings for Switcher Configuration (Config Menu)
Setting values
1 to 16
127