Assigning Pgm/Pst Logically To An M/E; Banks; Setting The Assignments Of Dme Channels To Use On The Individual M/E Banks - Sony MVS-6000 User Manual

Knob
1
3
In the <User Region Assign> group, select the user region you want to
assign. If you do not want to assign a user region, select [No Assign].
4
Repeat steps 2 and 3 as required to make the settings for other regions.
5
To confirm the setting, press [Execute]. To cancel the setting and return to
the original state, press [Clear] without pressing [Execute].
When you press [Execute], a confirmation message appears.
6
Press [Yes].
This assigns a region to a user region.

Assigning PGM/PST Logically to an M/E

1
In the Switcher >Config menu, press [Logical M/E Assign].
The Logical M/E Assign menu appears. The status area shows the physical
M/E and logical M/E organization.
2
Select the M/E you want to logically set to the PGM/PST from the
<Logical M/E to Physical P/P> group.
P/P: Assign the physical PGM/PST as logical PGM/PST.
M/E-1: Assign the physical PGM/PST as logical M/E-1.
M/E-2: Assign the physical PGM/PST as logical M/E-2.
M/E-3: Assign the physical PGM/PST as logical M/E-3.
Setting the Assignments of DME Channels to Use on
the Individual M/E Banks
The Switcher >Config >DME Config menu allows you to select the DME
channels to use on the M/E and PGM/PST banks for processed keys or DME
wipes.
1
In the Switcher >Config menu, press [DME Config].
The DME Config menu appears.
Parameter Adjustment
Region Region selection
Settings for Switcher Configuration (Config Menu)
Setting values
1 and upwards
129