Sony MVS-6000 User Manual page 167

Select the signal input to the DME (AUX bus output) and the signal returned
as the switcher primary input (reentry input) as follows.
1
In the Switcher >Device Interface menu, press [DME SDI Interface].
The DME SDI Interface menu appears.
2
Using any of the following methods, select the DME channel to which
operations apply.
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 DME Ch No
Note
When using the MVE-8000A, it is not possible to select any of DME 5 Ext
In to DME 8 Ext In.
3
In the <Select> group, select the AUX bus or reentry to be assigned to the
DME channel.
Aux Bus: Set AUX bus.
Re-Entry: Set reentry.
4
Depending on the selection in step 2, use any of the following methods to
make the setting.
• Press directly on the list on the right of the status area.
• Press directly on the list on the right of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
• When Aux Bus is selected
Knob Parameter
2 Src No
• When Re-Entry is selected
Knob Parameter
2 Src No
Adjustment
DME channel selection
Adjustment
AUX bus number
Adjustment
Reentry number
Interfacing With External Devices (Device Interface Menu)
Setting values
1 to 24
Setting values
0 to 48
Setting values
0 to 49
167