Saving And Recalling Setup Data - Sony MVS-6000 User Manual

Saving and Recalling Setup Data

File menu:
[Load]
Store
Setup menu:
[Setup Define]
Non-volatile memory
User setup data
Updating the switcher or control panel setup data saves the updated setup data
in RAM in each device.
• In Resume mode (see page 24), even if devices are reset or powered off, the
data is preserved in RAM, and recalled when the power is turned back on.
Note
The Resume mode cannot be used for DMEs and DCUs.
• In Custom mode (see page 24), the user-defined settings (user setup data)
saved in non-volatile memory or factory default setup data held in ROM in
Hard disk / memory card
User setup data
Load
RAM
Current setup data
(If in Resume mode, settings data is saved.)
In Custom mode, power on
or reset
Concept of saving and recalling setup data
Selecting the State After Powering On (Start Up Menu)
Save
File menu:
[Save]
Initialize
Setup
menu:
[All Clear]
ROM
Factory default setup data
25