Linking Switcher Bus And Router Destination - Sony MVS-8000 User Manual

Linking Switcher Bus and Router Destination

To provide links between the switcher bus and router destination, make the
following settings as required.
Matrix selection: Select the target of link setting from the eight matrices (1 to
Matrix position definition: Set the start address and level for the source and
Link table setting: Link a switcher cross-point button and matrix source.
Link bus setting: Link a switcher bus address and router destination.
Selecting a matrix number
1
2
3
4
To delete a link
With the link selected, press [Clear].
Defining the position of a matrix
Specify where in the 1024 × 1024 S-Bus space the link matrix is to be provided,
by setting the source and destination start address.
64
Overall Control Panel Settings (Config Menu)
Key4: Key assigned to key delegation button 4 ([DSK4] button)
8).
destination on the S-Bus.
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
In the <Link> group, press [External Bus Link].
The External Bus Link menu appears.
The status area shows the current link status.
Turn the knobs to select the matrix.
Knob Parameter Adjustment
1 Link No Link number
2 Link Matrix Matrix number
In the status area, the color of the selected part changes.
Press [Link Matrix Set].
This confirms the matrix selection and the selected part in the status area
returns to the previous color.
Setting values
1 to 64
1 to 8