Setting The Side Flag Video Material And Operation - Sony MVS-6000 User Manual

2
3
4

Setting the Side Flag Video Material and Operation

Make settings relating to the video material (4:3 aspect ratio) for applying side
flags.
For details of side flag operations, see "Side Flag Settings" in Chapter 10
(Volume 1).
Setting the aspect ratio (4:3/16:9)
1
2
3
130
Settings for Switcher Configuration (Config Menu)
Using either of the following methods, select the M/E or PGM/PST bank
for which you want to set a DME channel assignment.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
In the <DME Ch\annel> group, press the [Ch1] or [Ch2] button, turning it
on, to select the channel which you want to assign to the bank selected in
step 2.
Repeat steps 2 and 3 to assign DME channels to other banks.
In the Switcher >Config menu, press [Side Flags].
The Side Flags menu appears.
The status area lists the video/key pair numbers, video signal source
names, and aspect ratio settings (16:9/4:3).
Using any of the following methods, select the pair number for which you
want to make the setting.
• Press directly on the list in the status area.
• Use the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment
1 V/K Pair No Selection of a V/K pair by its
number in the list
3 Num Selection of number of V/K pairs
in the list
• To select all of the pair numbers, press [ALL].
In the <Aspect> group, press [4:3].
If you select [16:9], no side flags are applied.
Setting values
1 to 128
1 to 128