Sony MVS-6000 User Manual page 99

• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
3
a)
4
a) When the Command parameter is set to Sw'er GPI Test Fire, Panel GPI Test Fire, DCU
GPI, or Test Fire
When Macro Recall is selected: Turn the knob to select the macro
register you want to assign.
Knob
3
When Shotbox Recall is selected: Turn the knob to select the shotbox
register you want to assign.
Knob
3
5
Press [Action Set].
This assigns the selected action, which is reflected in the status area.
In the utility/shotbox control block, the assigned button lights orange.
If a shotbox register was assigned, the register name appears.
To cancel an assignment
After selecting the relevant button, press [Clear].
List of utility commands and memory recall button status
The following table shows the utility commands that can be assigned to
memory recall buttons.
a) Function
Command name
SWR Remote1 Enbl Switcher Remote 1 enabled/disabled
|
SWR Remote2 Enbl Switcher Remote 2 enabled/disabled
DME1 Editor Port Enbl DME1 editor port enabled/disabled
DME2 Editor Port Enbl DME2 editor port enabled/disabled
ME1 PGM1 ST M/E-1 PGM1 output safe title on/off
|
ME1 PGM4 ST M/E-1 PGM4 output safe title on/off
Parameter Adjustment
Command Utility command selection
GPI No GPI port number
Parameter Adjustment
Macro Macro register selection
Parameter Adjustment
Shotbox Shotbox register selection
|
|
Setting values
1 and upwards
1 and upwards
Setting values
1 to 99
Setting values
1 to 99
Button status
Lit green
Enabled
Enabled
Enabled
On
Setting Button Assignments (Prefs/Utility Menu)
Lit orange
Disabled
Disabled
Disabled
Off
99