I/O Connector Specifications - Omron SYSMAC NY Series Hardware User Manual

Locking and Removing the Power Connector
The power connector automatically locks into place when the black part of the connector is held and
pushed in.
A
Pushing both orange sliders B towards the end of the connector A will release the lock when remov-
ing the connector.
4-2-2

I/O Connector Specifications

Details of the I/O connector are provided below.
The I/O connector is locked when inserted to prevent unintentional disconnection.
The connector can only be inserted in the correct way.
The Lock-and-Release Latch connector is a Phoenix Contact type DFMC 1,5/ 3-ST-3,5-LR BK
(1711658).
Conductor isolation rating
Termination rating
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)
B
Item Specifications
90°C
90°C
4 Specifications
4
4-13