Remove The Cover - Omron SYSMAC NY Series Hardware User Manual

7 Maintenance
7-2-1

Remove the Cover

Applicable for products with a cooling layer that has a removable Cover.
The Cover of the cooling layer provides access to the following items.
• Battery
• Fan Unit (applies to products with active cooling)
The inside of the Cover contains a label with the battery replacement date.
No tools are required to open the Cover.
Use the following procedure to remove the Cover of the Panel PC.
1
Power OFF your Panel PC if it has active cooling.
Precautions for Safe Use
Do not remove the fan cover while the power is ON. Contact with the rotating fan may result in
injury.
2

Remove the Cover.

1) Pull the lever
2) Lift the side
3) Remove
The Cover is removed.
To mount the Cover, position the side of the Cover in the Panel PC and push the cover in place.
The lever will lock in place.
7-6
3
1
1 to unlock the Cover.
2 to tilt the Cover.
3 the complete Cover.
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)
2