5 Installation
5-3-8
Prepare the Mounting Surface
The IPC Machine Controller can be mounted in a landscape or portrait orientation.
The mounting hardware is integrated into the back of the Panel PC.
Z
Item
Panel cutout
dimensions
Panel thick-
*2
ness range
Dimensions
*1.
Refer to 1-4 Product Configuration on page 1-7 for model details.
*2.
The minimum panel thickness depends on the panel material.
For the most common materials the minimum panel thickness is mentioned in the following steps.
5-24
Z1
R
*1
12.1 inch
-0 +1
Width X1 = 314
mm
-0 + 1
Height Y1 = 216
mm
Panel thickness range Z1 = 1.6 to 6.0 mm
Refer to 4-1-1 Dimensions and Weight on page 4-2 for X, Y, Z and R dimensions.
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)
X
X1
Model Specifications
*1
15.4 inch
-0 +1
Width X1 = 383
mm
-0 +1
Height Y1 = 259
mm
Y1
*1
18.5 inch
-0 +1
Width X1 = 463
mm
-0 +1
Height Y1 = 285
mm
Y