Omron SYSMAC NY Series Hardware User Manual page 219

USB
SMART Settings
UEFI Network Stack
NVMe Configuration
Intel® Ethernet
Connection I218-LM -
Unique MAC Address
*1. Smart Self Test monitors the status of the HDD/SSD.
Enable only when Smart Monitoring software is used.
*2. In Main BIOS version A£27R111 and onward.
BIOS - Chipset
Provides Chipset settings.
Changeable BIOS Chipset parameters and their factory default values:
Platform Controller Hub
(PCH)
Processor (Integrated
Components
*1. In Main BIOS version A£27R111 and onward.
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)
Item
XHCI Mode
Overcurrent Protection
USB Ports Per-Port Disa-
ble Control
Legacy USB Support
External USB Controllers Support
XHCI Hand-off
EHCI Hand-off
USB Mass Storage Driver Support
USB Transfer Timeout
Device Reset Timeout
Device Power-up Delay Selection
Generic Ultra HS-COMBO
*1
Smart Self Test
UEFI Network Stack
NVMe Configuration information
NIC Configuration
Blink LEDs
*2
Link Status
Item
Isolate SMBus Segments
*1
PCH Thermal Device
Audio Device (B0:D3:F0)
USB Ports Per-Port Disa-
ble Control
- USB Port 0...6
- USB 3.0 Port 0...1
Link Speed
Wake On LAN
Appendices
Default / Remark
Enabled
Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Enabled
20 sec
20 sec
Auto
Auto
Disabled
Disabled
Display of NVMe Configu-
ration parameters
Auto Negotiated
Enabled
0
Disconnected
Default / Remark
During POST
Disabled
Enabled
A-9
A