Configurations That Do Not Allow Online Connections - Omron SYSMAC NY Series Hardware User Manual

Additional Information
It is not possible to use a USB port of the Panel PC to connect the Sysmac Studio with the
Machine Controller Software.
2-4-2

Configurations That Do Not Allow Online Connections

This section gives information on configurations that do not provide a connection to the Sysmac Stu-
dio.
Routing through CS/CJ-series EtherNet/IP Units/Ports
You cannot connect to an NY-series Panel PC by routing through a CS/CJ-series Ethernet/IP Unit or
port (CS1W-EIP2, CJ1W-EIP21, CJ2 CPU Unit built-in EtherNet/IP port, or CJ2M CPU Unit built-in
EtherNet/IP port).
CJ2 CPU Unit built-in EtherNet/IP port or EtherNet/IP Units
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)
EtherNet/IP
2 System Configurations
2
2-9