Parameterizing; General Settings; Figure 15: General Settings; Table 19: General Settings - WAGO -TO-PASS 761 Manual

40 Commissioning
Pos : 32 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Inbetri ebnehmen - Konfigurier en - Parametri eren/Par ametri eren - Ü bers chrift 1 @ 3\mod_1223554593484_21.doc x @ 23717 @ 3 @ 1
6.2.1

Parameterizing

Pos : 33.1 /Serie 759 (WAGO-Softwar e)/TO- PASS Konfigurationss oftware/Parametri erung/Parametrier ung Allgemei ne Ei nstellungen @ 3\mod_1223554662781_21.doc x @ 23720 @ 2 @ 1
6.3

General Settings

Select the menu item File
connection, interface or language for the TO-PASS

Figure 15: General settings

Table 19: General settings

Connection
RS-232 / GSM /
Analog / ISDN
Modem init.
Area code
Settings for making general settings, such as type of
>
Select the type of connection for communicating with the
®
TO-PASS telecontrol module:
RS-232
GSM Dial-up using GSM modem on the PC
Analog Dial-up using analog modem on the PC
ISDN Dial-up using ISDN modem on the PC
If the connection is to be established via a modem and this
modem requires initialization, enter the initialization string in
this field.
If this connection is to be established via a modem at an
analog or ISDN PBX and a trunk code is required for this,
enter the trunk code in this field.
WAGO-TO-PASS® 761
761-110 Telecontrol Module Compact
®
operating interface.
Direct connection via RS-232 cable
Manual
Version 2.0.0