ITT Bornemann SLH-4U Operating Instructions Manual page 25

3. Remove the preservation agent with cleaning fluid and a cloth or operate
the pump with a cleaning agent.
4. Dispose of the cleaning agent in accordance with locally applicable regula-
tions.
5. Check all external elastomers (O-rings, shaft seals) for form elasticity and
replace if necessary.
6. Following storage periods exceeding 3 months: Drain preservative oil from
the transmission casing then fill with lubricating oil (
on page 64).
7. Following storage periods exceeding 3 months: Remove the sealing plugs
from the transmission casing and insert ventilation filter.
8.
Due to the high degree of air humidity and temperature varia-
tions condensate collects, which is not visible beneath the oil.
In the case of drive-side oil lubrication of the bearings, fully drain oil from
the hollow spaces of the bearings and replace with new oil.
03/2020 JP Rev. 1
Transport and storage
Ä 'Filling lubricating oil'
Type SLH-4U 25