ITT Bornemann SLH-4U Operating Instructions Manual page 62

Maintenance and repairs
Interval Module (if available)
Mechanical seal
Shaft sealing rings
Sealing system
Quench system
Drive unit
Heating (optional)
After the first 250 hours
Gear casing
of operation, at the
latest after 3 months
3 months Sealing system
Quench system
With intermittent opera-
Gear casing
tion: every 1000 hours
of operation, at the
latest after 6 months
Every 6 months Barrier system
With continuous opera-
Gear casing
tion, every 3000 hours
of operation
Yearly
Gear casing
1) Manufacturer's specifications, pump system operating instructions
2)
Includes bearings and gears
62
1)
1)
2)
2)
2)
2)
Type SLH-4U
Who Measure
Specialist per- n Check for leakage.
sonnel
n In the event of severe leakage:
–
–
–
Specialist per- n Check for leakage.
sonnel
n In the event of severe leakage:
–
–
–
–
Specialist per-
n Check function.
sonnel
n Clean filter and bleed valve.
n Top up barrier fluid if necessary.
n If barrier/quench liquid is contaminated:
–
Specialist per-
n Check for wear.
sonnel
Specialist per-
n Check function.
sonnel
n Check tightness.
Specialist per- n Change lubricating oil (
sonnel oil' on page 64).
Specialist per- Change barrier/quench liquid.
sonnel
Specialist per- n Change lubricating oil (
sonnel oil' on page 64).
Specialist per- Change barrier fluid.
sonnel
Specialist per- n Change lubricating oil (
sonnel oil' on page 64).
Specialist per- n Clean bleed filter.
sonnel
n Replace if necessary.
03/2020 JP Rev. 1
Determine leakage intensity by counting
the drops.
Consult manufacturer (specify leakage
site and intensity).
Replace mechanical seal (consult the
manufacturer).
Check oil levels at short intervals.
Determine leakage intensity by counting
the drops.
Consult manufacturer (specify leakage
site and intensity).
Replace shaft seal (consult the manufac-
turer).
1)
1)
Check mechanical seal and renew bar-
rier/quench liquid.
1)
1)
1)
Ä 'Filling lubricating
Ä 'Filling lubricating
Ä 'Filling lubricating
1)