Changing From One System To Another - Marport M6 Mx Service Manual

M6 - Mx computer System | V2 | Installation
What to do next
You can connect the Mx computer to the Mac and receiver.

Changing from One System to Another

If you format an Mx computer that already has a system installed (e.g. changing from an M4 to an
M6 system), you need to begin the installation by the following steps:
Procedure
1. Connect the screen and keyboard and plug in the system USB key.
2. Press
to switch on the Mx computer, then immediately press Delete key.
3. When the following screen appears, press the right arrow key to go to the Boot menu.
4. Press the down arrow to go to Boot Option #2 - UEFI.
5. Press + key. The option is now placed as #1.
6. Press F4, then press Enter to select Yes.
| 31