Installing Hydrophones; List Of Marport Hydrophones - Marport M6 Mx Service Manual

Installing Hydrophones

You need to connect hydrophones to the system.
Note: For more information about Marport hydrophones, please refer to Hydrophone
Installation Manual.

List of Marport Hydrophones

These are technical specifications for hydrophones currently sold by Marport. For information
about obsolete hydrophones, please contact Marport support.
Product
reference
NC-1-05 Passive wideband
hydrophone (no
preamplifier)
NC-1-05 Passive
+ hydrophone
NC-2-02 + Wideband
preamplifier box
Name
• Vessel with very low
level of noise (below
-110 dBV).
• Sensors close to the
vessel (approx. 300 m)
• For positioning
systems with Slant
Range/pinger (one
passive hydrophone
is necessary for
transmission).
• Vessel with normal
level of noise (below
-100 dBV).
• Large number of
sensors.†
• Use at great depths (>
500 m).
• Gain configurable (Low
or High)
• Filters configurable (38
and/or 50kHz).
• Low noise environment
between passive
hydrophone and
wideband preamplifier
box
M6 - Mx computer System | V2 | Installation
Bandwidth
Use case
(3 dB)
33-60 KHz 0.0 mA
33-60 KHz 25-29 mA
Typical
current Cable*
consumption
Blue
Blue
| 47