The receiver information page is displayed.
7. Click
> Advanced, then
On the Manage Receiver page you can see:
• Information about the receiver, such as the version of the application firmware and its IP
address.
• The list of application and system firmware that have been installed on the receiver.
8.
In the Application table, click
downloaded and unzipped.
The firmware file is added to the list.
9.
Click the firmware name, then click
10. Wait for the receiver to reboot.
11. Go back to the receiver page, then to the firmware list, and check that the firmware has been
correctly uploaded. You should see a green tick.
> Manage.
, then select the *.bz2 file in the firmware folder you
to upload the firmware into the receiver.
M6 - Mx computer System | V2 | Installation
| 45