Connecting The Hydrophone To The Receiver - Marport M6 Mx Service Manual

Connecting the Hydrophone to the Receiver

You need to connect the hydrophone to the receiver to be able to display sensor data received by the
hydrophones.
Procedure
• Connect the extension cable of the junction box to a hydrophone input on the receiver:
• Connect to the NTC hydrophone input H1 or H2 to be able to receive water temperature from
Marport hydrophones.
Note: H3 hydrophone input allows to receive water temperature from an NMEA
connection (Scanmar hydrophone or NMEA converter junction box). If you connect a
Marport hydrophone to H3 without NMEA converter, you will not have temperature
data from the hydrophone.
M6 - Mx computer System | V2 | Installation
| 49