Changing Receiver 2 Ip Address - Marport M6 Mx Service Manual

5. Disconnect receiver 1 from the Mx computer.
6. Restart the Mx computer.
7. Connect receiver 2 to the Mx computer.
8. Follow the exact same procedure as for receiver 1.
When the update of receiver 2 is complete the receiver page looks like below:
Note: It is normal that the page is the same as for receiver 1. It is because both receivers
have the same IP address, so they are recognized the same way.
What to do next
Change the IP address of receiver 2.

Changing Receiver 2 IP Address

Before you begin
The receiver 2 is connected to the Mx computer, not receiver 1.
M6 - Mx computer System | V2 | Installation
| 40