Configuring Mac Mini Network - Marport M6 Mx Service Manual

4.
Click .
Results
The Mx computer reboots. The IP address has been changed.
What to do next
Change the Ethernet IP address into 192.168.11.165. See
37.

Configuring Mac Mini Network

You need to change the IP address of the computer to be able to communicate with the Mx
computer.
About this task
Note: If you are moving from a system without the Mx computer, you need to switch off the
virtual machine:
• Open VMware Fusion, then click Virtual Machine > Shut Down in the toolbar.
• Cancel the automatic opening of VMware Fusion: Apple Menu
Users & Groups > Login Items and remove VMware from the list.
Procedure
1. From the top left corner of the screen, click Apple Menu
2. If using an internet router, it must be connected to the port named Apple USB Ethernet
Adapter. In order to connect to the internet, make sure that Apple USB Ethernet Adapter
network is at the top of the list of networks, then is followed by Ethernet. If it is not at the top
of the list, click the tooth wheel icon at the bottom of the list and select Set Service Order.
M6 - Mx computer System | V2 | Installation
Configuring Mac Mini Network
> System Preferences >
> System Preferences > Network.
on page
| 37