Equipment List - Marport M6 Mx Service Manual

Equipment List

Here are the hardware and software you need to install a system with a Mx computer.
Computer
• 1 Mac mini i7 computer
• 1 wireless trackball mouse
• 1 Mac mini power cord
• 2 Thunderbolt to HDMI/VGA/DVI adapter
• 1 Ethernet cable for connection with Mx computer
• 1 Scala/Scala2 software dongle
Receiver
• 2 Mx receivers
• 4 Mx hydrophone junction boxes (ref. 46-055-01)
• 2 CAT5e network cables
• 2 Ethernet connector kits
• 2 Mx hardware kit (mounting screws and ground straps)
Mx computer
Aaon compact fanless box PC. Reference: PO boxer-6639M
Power supply: MEAN WELL HEP-150-24 A
Optional Equipment (not included)
• 1 to 3 monitors
• 1 Uninterruptible Power Supply (UPS) to prevent problems if the mains power fails
(recommended). Size: 500VA.
• Additional hydrophone junction boxes
• 1 test hydrophone that you can keep on board and connect to the receiver to do functional tests.
• 1 NMEA converter junction box (ref. NC-2-TEMP) to receive temperature data from
hydrophones
• 1 NMEA multiplexer to receive NMEA data and display them in Scala/Scala2: ShipModul
MiniPlex-3E-N2K if using NMEA2000 and NMEA0183 or Miniplex-3E if using only NMEA0183.
• If using Mosa2 on a tablet computer: refer to Marport sales offices to know the recommended
model.
Software
Software Application Name
Marport validated MacOS
Scala/Scala2
M6 - Mx computer System | V2 | Introduction and Presentation
Definition
Operating system on computer
Marport software application collecting, processing, storing
and displaying data received from sensors, sounders and other
connected devices.
| 11