Table of Contents
Advertisement
7.2 Pairing with underfloor heating wiring centre (KL08RF/Control Box)
PLEASE NOTE!
For easier installation, please make sure you have already added underfloor heating wiring centre (KL08RF/Control Box) to your ZigBee network (please
refer to the underfloor heating wiring centre manual instruction).
1
Select "YES" by „
buttons. Confirm by
4
Select system type: UNDERFLOOR,
press
button to confirm.
7
You can pair your thermostat with
more than one zone. Select additional
zones or finish the pairing process by
button.
REPLACE ZONE:
If user during pairing process will choose already occupied zone then thermostat will display „ZONE OCCUPIED" message. Occupied zone can be replaced
by other thermostat. It will remove current thermostat assigned to that zone. Please look at the steps below:
52
2
Now thermostat is looking for the
" or „
"
signal from the coordinator...
button.
5
Using
select the Control Box number.
Press
8
When thermostat is succesfully
1
and
buttons
button to confirm.
paired main screen will be
displayed.
2
3
5 sec.
OR
5 sec.
Open the ZigBee network
6
Use
or
buttons to select
the zone number and press
button to confirm.
5 sec.
9
OR
5 sec.
Close the ZigBee network
3
3
Hide quick links:
Advertisement
Table of Contents
