In order to control SQ610RF over the Internet or via the SALUS Smart Home mobile app (ONLINE mode), it must be installed together with the UGE600 Internet gateway (sold separately). From the application level, it is Connect charger to micro-USB Port which is at possible to pair SQ610RF with other system elements, e.g.
LCD Icon Description Buttons Description Button Function 1) Menu button / Return button. 2) In the MAIN SCREEN: Press and hold for 3 sec to change the thermostat operating mode (Schedule mode / Permanent mode / Temporary override mode). 3) In the SETTINGS SCREEN: Press and hold for 3 sec to go back without saving the changes. 4) In the PAIRING SCREEN (in SYSTEM TYPE Menu): Press and hold for 3 sec to see other pairing options.
Page 4
First power up sequence COMPATIBILTY WITH OTHER SALUS CONTROLS DEVICES Please note: For easier installation, please make sure you have already added other devices to your ZigBee network, such as ONLINE MODE OFFLINE MODE Underfloor Heating Control Box (KL08RF) or Radiator heads (TRV’s) etc.
Page 5
Installation in ONLINE mode After Language selection follow below steps to add your device to the Smart Home app and pair with other devices: SALUS SmartHome Go to SALUS Smart Home app Connect equipment Name this equipment SQ610RF Thermostat Finish After that thermostat will display main screen.
Page 6
Pairing with TRV radiator head (Install the TRV according to the instructions included with Installation in OFFLINE mode product) Pairing with Wiring Centre / Control Box (Install the Wiring Centre / Control Box according to the Open the ZigBee network instructions included with product) 5 cek.
Page 7
RESET USER SETTINGS to the S1/S2 input of SQ610RF. Additionally, by connecting a NO type of ON/OFF voltage-free contact, you can use this input as a OneTouch rules trigger (programmed in the Salus Smart Home app) or as a Heat/ TEMPERATURE SCALE Cool changeover.
Need help?
Do you have a question about the Quantum SQ610RF and is the answer not in the manual?
Questions and answers