Display Floor Temp; Standby Temp Setpoint - Salus SQ610 Quantum Full User Manual

9.6.5 Display floor temp

Display floor temperature is a function which is available only when thermostat works with external floor temperature sensor.
To show/hide floor temperature value please follow steps below:
1
Press button to enter the
main menu.
4
Select SHOW or HIDE using
buttons. Confirm selection by

9.6.6 Standby temp setpoint

There are two standby temperature setpoints - for heating and for cooling mode. Standby setpoint range for heating mode is from
5 ° C to 35 ° C. Standby setpoint range for cooling mode is from 5 ° C to 40 ° C. To set it on please follow steps below:
NOTE: If paired with TRV radiator heads or RX10RF receiver, then standby for cooling is not available.
1
Press button to enter the
main menu.
4
Select for heating or cooling option.
2
Go to the user settings.
5
and Floor temperature value is displayed
with one degree accuracy.
button.
2
Go to the user settings.
5
3
Choose display floor temp option.
3
Choose standby temp setpoint option.
Set temperature
setpoint by or
buttons. Confirm by
button.
63