Montage; Package Content; Proper Thermostat Location; Wiring Diagram (Sq610 Quantum Thermostat) - Salus SQ610 Quantum Full User Manual

Hide thumbs Also See for SQ610 Quantum:

Manual (60 pages)

Manual (9 pages)

Manual (10 pages)

Table Of Contents

Table of Contents

2. Montage:

2.1 Package Content:

1) SQ610 Quantum thermostat

2) Mounting screws

3) Manual instruction

4) Jumper wire

2.2 Proper thermostat location

Please note:

The ideal position to thermostat mounting is about 1,5m under floor level far from heating or cooling sources.

Thermostat can't be exposed to sunlight or any extreme conditions like for example draft.

Because of fire and explosion risk there is not allowed to use thermostat in atmosphere of explosive gases and flammable liquids (eg coal dust). In case

if any of listed dangers occur you have to use additional protection measures – anti-dust and explosive gases (tight cover) or prevent their formation.

Furthermore, thermostat can't be used in condensation of water vapor conditions and be exposed to water action.

Wall Mounting

Mounting: to mount thermostat you can use included accessories (mounting screws). Remove

plate from the back to mount it to the wall. After that just put thermostat on the plate. Look at

the picture to see how to remove back plate from the SQ610 Quantum.