Permanent Hold; Pairing Optima S With Ss909Zb Temperature Sensor - Salus Optima S User Manual

20

Permanent Hold

To permanently override the schedule, you must turn the schedule Off either through
the thermostat menu (
Off the Permanent Hold icon
The current set point will be maintained until a future change is made, or The
Permanent Hold is turned Off by selecting a Schedule mode.

Pairing Optima S with SS909ZB Temperature Sensor

When the thermostat is located where it may not read the optimum temperature for
the comfort zone, a remote wireless sensor (SS909ZB) may be paired with the
thermostat and the ambient temperature of the remote sensor will be used for control.
If the sensor has not be previously associated with a Zigbee network:
1) Place the Gateway or Coordinator in Joining mode (Scan for devices)
2) Place the Optima S in Identify mode:
a) Tap the Settings button until IDENTIFY? is displayed
b) Tap and IDENTIFY CHECK 10 will be displayed and count down from
10 to 0 minutes.
3) Remove the SS909ZB from the packaging:
a) Remove the front cover by lifting slightly on the top edge and pulling forward.
b) Remove the red battery tab
i) The LED on the Sensor will flash 3 times, pause, and repeat
ii) When the LED on the Sensor stops flashing it will have joined the network
and paired with the Optima S
TYPE-SCHD OFF )
will appear on the thermostat display.
, or by using the App. When the schedule is
Salus