Wired Device (How To Set Up) - Salus SQ610 Quantum Full User Manual

8. Wired Device (how to set up)

Please note:
Thermostat SQ610 Quantum can work without UGE600 Universal Gateway or CO10RF Coordinator as a standalone device. You can connect it directly
to the boiler, pump or other device which requires volt-free switching or 230V AC power supply. Look at the diagrams at the next page to see how to
connect it.
Self-acting SQ610 Quantum thermostat without application support can be easily added to the Smart Home app anytime. All settings made before
adding to the application are automatically copied to the Smart Home app.
1
To power on the thermostat you
have to connect it to the 230V
power then...
4
Now, choose your language by
„ " or „
Confirm your language by
2
5
" buttons. „
button. SQ610 Quantum thermostat as a
standalone wired device and confirm
...display will show all icons...
Select „NO" by
" or „ " buttons to set
by button.
3
...then thermostat will display the
software version.
6
After all you will see the main
thermostat's display.
55