5.5 Pairing with Smart Relay SR600
Please note:
For easier installation, please make sure you have already added Smart Relay SR600 to your ZigBee network (please refer to the Smart Relay SR600
manual instruction).
1
Select "YES" by „
buttons. Confirm by
4
Open main menu.
7
Press „Scan for equipment" button
2
" or „
"
button.
5
8
Now thermostat is looking for the
signal from the coordinator...
Select „Settings".
App has started scanning...
3
SALUS
SmartHome
Go to SALUS Smart Home app
6
Now enter to the „Setup Equipment".
9
...Gateway has started flashing red and
searching for the thermostat...
Thermostat is connected. Go to the
Smart Home app to configure it.
19