Introduction; Product Compliance; Safety Informations; Product Overview - Salus SQ610 Quantum Full User Manual

1. Introduction

1.1 Product Compliance

This product complies with the essential requirements and other relevant provisions of Directives 2014/53/EU and
2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address:
www.saluslegal.com.

1.2 Safety Informations

Use in accordance to national and EU regulations. Use the device as intended, keeping it in dry condition. Product for
indoor use only. Installation must be carried out by a qualified person in accordance to national and EU regulations.
Disconnect your equipment before cleaning it with a dry cloth.
Warning:
Please always ensure the AC 230V mains power is switched off before installing or working on any components.

1.3 Product Overview

The SQ610 Quantum is a ZigBee temperature controller for wireless control of iT600 series devices, such as the KL08RF
wiring centre, mini TRV head, RX10RF boiler control module. In order to control SQ610 over the Internet or via the SALUS
Smart Home mobile app (ONLINE mode), it must be installed together with the UGE600 Internet gateway
(sold separately). From the application level, it is possible to pair SQ610 with other system elements, e.g. Smart Plug
SPE600, Smart Relay SR600 or window/door sensor OS600/SW600.
SQ610 can be used locally without an Internet connection (OFFLINE mode), however, it's communication with other
devces must be done using the CO10RF coordinator (sold separately).
SQ610 Quantum can work without UGE600 Universal Gateway or CO10RF Coordinator as a standalone device.
SQ610 Quantum thermostat (front view)
5