Configure Services - Digi Connect IT Mini User Manual

Configure the Connect IT Mini
Section
Zones
Port forwarding
Packet filtering
Custom rules
Quality of Service
4. Click Save or Apply.

Configure services

You can configure services for the Connect IT.
1. Log in to manage the Connect IT.
2. Access the Configuration > Services
3. Each sub-section enables you to configure a different service. Expand the sub-section and
complete the fields in each of the sections. To display information about what you should enter
in each field, hover over the field name or click the down arrow and then Help next to each
field.
Section
Web administration
SSH
Telnet
Digi Connect IT® Mini User Guide
Description
Configure the groups of network interfaces that can be
referred to by packet filtering rules and access control
lists.
Configure a list of port forwarding rules. These rules allow
network connections to the Connect ITto be forwarded to
other servers by translating the destination address.
Configure a list of packet filtering rules. These rules define
whether to accept or reject network connections that are
forwarded through the Connect IT.
Configure a script that is run to install advanced firewall
rules beyond the scope or capabilities of the standard
Connect IT configuration.
Configure the quality of service, bandwith allocation,
traffic shaping, and traffic prioritizing features.
screen.
Description
The web administration service provides an HTTPS
interface for managing the Connect IT.
The SSH service provides and SSH server for managing
the Connect IT.
The Telnet service provides a Telnet server for managing
the Connect IT.
Note Telnet is an insecure protocol. It should only be used
for compatibility reasons, and only if steps have been
taken to ensure the network connection is secure.

Configure services

40