Table of Contents
Advertisement
Configure the Connect IT Mini
3. Expand the port that you want to configure.
4. Expand the TCP connection section.
5. Configure the settings.
Setting
Enable
Port
6. Specify the addresses, interfaces, and firewall zones which are allowed to access the serial
port. Expand the Access control list.
Setting
IPv4 Addresses
IPv6 Addresses
Interfaces
Zones
7. Click Save or Apply.
Enable an SSH connection on the serial port
You can enable an SSH connection on the serial port.
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > Serial
Digi Connect IT® Mini User Guide
Description
Select the Enable option to allow the serial port to be directly
accessed by a raw TCP connection.
WARNING! This connection is not authenticated
or encrypted.
Specify the TCP port for the service.
Minimum value: 1
Maximum value: 65535
Default: 4001
Description
Expand the IPv4 Addresses section to add IPv4 addresses or
networks from which this serial port can be accessed. Click
Add to add an address.
Expand the IPv6 Addresses section to add IPv6 addresses or
networks from which this serial port can be accessed. Click
Add to add an address.
Expand the Interfaces section to add network interfaces from
which this serial port can be accessed. Click Add to add an
interface.
Expand the Zones section to add firewall zones from which
this serial port can be accessed. Click Add to add a zone.
screen.
Configure a serial port
27
Advertisement
Table of Contents
