Digi Connect IT Mini User Manual page 30

Configure the Connect IT Mini
Setting
Match SIM carrier
Match PLMN identifier
Match IMSI
Match ICCID
PIN
Phone Number
Roaming
Digi Connect IT® Mini User Guide
Description
This conditional field displays when the Carrier option is
selected from the Match SIM by list box.
Select the appropriate SIM carrier from the list box. The
interface is applied when the SIM card is provisioned from
the carrier.
The default value is AT&T.
This conditional field displays when the PLMN identifier
option is selected from the Match SIM by list box.
Enter the SIM PLMN (Public Land Mobile Network) match
criteria. The interface is applied when the SIM card is
provisioned from the carrier with this PLMN carrier. The
PLMN identifier consists of the Mobile Country Code (MCC)
followed by the Mobile Network Code (MNC).
This conditional field displays when the IMSI option is
selected from the Match SIM by list box.
Enter the IMSI (International Mobile Subscriber Identity)
match criteria. The interface is applied when the SIM card
has this IMSI.
This conditional field displays when the ICCID option is
selected from the Match SIM by list box.
Enter the ICCID (Integrated Circuit Card Identifier) match
criteria. The interface is applied when the SIM card has this
ICCID.
The PIN required to unlock the SIM card. Leave blank if not
PIN is required.
The phone number stored on the SIM card will be
automatically reported to enable SMS services. If the SIM is
not provisioned with a phone number, or it contains an
incorrect phone number, it will be necessary to complete this
field with the correct phone number to reach this device.
In normal operation, this field should be blank.
Enable roaming to allow connections to data services outside
of the original country of the SIM. When enabled, the cost of
data use may increase significantly.
Configure a modem
30