Control The Outlet Power From A Terminal (All Users) - Digi Connect IT Mini User Manual

Configure the Connect IT Mini
4. You can do the following:
View power controller status
Each outlet and power controller combination configured for remote power management
appears in the page. The state of the power for each outlet is displayed:
on: The outlet has power.
n
off: The outlet does not have power.
n
unknown: The Connect IT Mini cannot get a status from the power controller.
n
Change the power state
You can change the power state for an outlet.
a. From the Change State list box, select an option from the list box.
b. Click Apply.
View power manager log
A log of all remote power management events appears in the Power Manager Log. Click
Download to download a copy of the log.

Control the outlet power from a terminal (all users)

A user can log into a terminal on the Connect IT and then power the device connected to an outlet on
and off.
1. Log in to manage the Connect IT.
2. Access the Terminal
3. When prompted, enter your user name and password.
4. Information about the port you are connected to, as well as commands.
Connecting to port3: PowerManPort3
Settings: 9600, 8, 1, none, none
Type '~.' to disconnect from port
Type '~?' to list commands
5. Enter ~? to display additional commands.
Command
~.
~B
Digi Connect IT® Mini User Guide
On: Turn on the power to that outlet.
n
Off: Turn off the power to that outlet.
n
Cycle: Turn the power off, then on. If the power state for the outlet is
n
currently off, then the power is just turned on.
screen.
Description
Disconnect from the port.
Send a BREAK sequence.
Configure Remote Power Management
23