3M -Matic 8000a Instructions And Parts List page 95

Operation
(continued)
Figure 3-4
Place tape roll on tape drum to
dispense tape with adhesive side
forward. Seat tape roll fully against
back fl ange of drum. Adhere tape
lead end to threading needle as
shown.
Manually turn tape roll to create
slack tape while pulling threading
needle through tape applying
mechanism until needle is through
and tape is in alignment with
applying roller.
Excess tape can be cut with a
scissors at applying roller.
3M-Matic Accuglide 3 - 2 Inch Taping Head
™
Page 11
WARNING
• To reduce the risk associated with sharp
blade hazards:
- Keep hands and fi ngers away from tape
cutoff blades under orange blade guards.
The blades are extremely sharp.
Figure 3-4 Tape Loading/Threading
Figure 3-5 Tape Loading/Threading
NA - ENG
April 2016