Specifi Cations - 3M -Matic 8000a Instructions And Parts List

Specifi cations

1. Tape:
For use with Scotch
2. Tape Width:
48mm [2 inches] minimum to 72mm [3 inches] maximum.
3. Tape Roll Diameter:
Up to 405mm [16 inches] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4. Tape Application Leg Length - Standard:
70mm ± 6mm [2-3/4 inches ±1/4 inch]
Tape Application Leg Length - Optional:
50mm ± 6mm [2 inches ± 1/4 inch] (See "Adjustments – Tape Leg Length.")
5. Box Size Capacities:
For use with center seam regular slotted containers.
6. Operating Rate:
Conveyor speeds up to 0.5 m/s [100 feet per minute].
7. Operating Conditions:
Use in dry, relatively clean environments at 5° to 40°C [40° to 105°F] with clean dry boxes.
Important – Taping heads should not be washed down or subjected to conditions causing
8. Taping Head Dimensions:
Length –
Height –
Width
Weight –
3M-Matic Accuglide 3 - 3 Inch Taping Head
™
Page 6
pressure-sensitive fi lm box sealing tapes.
®
Minimum
Length – 150mm [6 inches]
Height – 120mm [4-3/4 inches] (most "3M-Matic" Case Sealers)
90mm [3-1/2 inches] (with optional 2 inch leg length)
Width – 150mm [6 inches]
When upper and lower taping heads are used on "3M-Matic" case
sealers, refer to the respective instruction manual specifi cations for
box weight and size capacities.
moisture condensation on components.
442mm [17 3/8 inches]
648mm [25 1/2 inches] (with tape drum)
– 130mm [5-1/8 inches] (without mounting spacers)
Packaged: 8.2kg [18 lbs.] Unpackaged: 7.3kg [16 lbs.]
fi lm tapes.)
®
Maximum
Unlimited
(Specifi cations continued on next page.)
Limited by
Case Sealer
NA - ENG
April 2016