Shipment, Handling, And Storage 5.1 Packed Machine Shipment And Handling; Overseas Shipment Packaging (Optional); Handling And Transportation Of Uncrated Machine; Machine Storage - 3M -Matic 8000a Instructions And Parts List

5. Shipment-Handling-Storage-Transport
5.1 Shipment and Handling of
Packed Machine
- The machine is fi xed on the
- The package is suitable to travel
- Optional sea freight package is
Packaging Overall Dimensions
(Figure 5-1)
See Specifi cations.
During the shipment it is possible
to stack a maximum of 2 machines
(Figure 5-2).
5.2 Packaging for Overseas Shipment
(Optional - Figure 5-3)
The machines shipped by sea freight
are covered by an aluminum/
polyester/polythene bag which
contains dehydrating salts.
5.3 Handling and Transportation of
Uncrated Machine
The uncrated machine should not
be moved except for short distances
and indoors ONLY. Without the
supporting pallet, the machine is
exposed to damage and may cause
injuries. To move the machine use
belts or ropes, paying attention to
place them in the points indicated
using care to not interfere with the
lower taping head (Figure 5-4).
5.4 Storage of the Packed or
Unpacked Machine
If the machine is not used for a
long period, please take the
following precautions:
- Store the machine in a dry and
- If the machine is unpacked it is
- Do not stack anything over the
- It is possible to stack a maximum
(if they are in their original packing).
3M-Matic 8000a-8000a3
™
Page 16
pallet with four (4) bolts and can
be lifted by using a fork truck.
by land and by air.
available.
clean place.
necessary to protect it from dust.
machine.
of 2 machines
L
L
H
H
Figure 5-4
W
W
Figure 5-1
Figure 5-2
Figure 5-3
NA - ENG
April 2016